Creating, Editing, and Deactivating a Permit

Permit transactions are authentication-only transactions (non-revenue generating) to allow for access and inventory control. A permit is physically represented as a QR/barcoded decal, printed/mobile pass, or hangtag - these can include (but are not limited to) employee parking permits, passes distributed by the venue to a specific group of parkers, etc. Permit owners are allowed multi-entry parking in designated lots for all events as long as their permit status allows.

1. Navigate to JustPark Suite (suite.parkhub.com) and log in
2. Select "Legacy Portal" in the top-left-hand corner. If you do not have access, please contact your JustPark account team.
3. Select "Create" within the menu on the left-hand side

• The only REQUIRED field is "First Name"

• Barcodes must be unique for each permit

  - If you do not enter a barcode number, a barcode will be generated for you
  - You can use the following resource to Print QR codes with the appropriate barcode number
  http://www.barcode-generator.org/

• See the guide below for an explanation and requirements of each field*
  4. Click "CREATE PERMIT"

Here is a guide that explains what each field is:

To view or make edits to your Permits

A permit will be accepted through infinity, unless you specify a Valid To date or deactivate it. To edit a permit, please follow these steps:

1. Navigate to JustPark Suite (suite.parkhub.com) and log in
2. Select "Legacy Portal" in the top-left-hand corner. If you do not have access, please contact your JustPark account team.
3. Select "Permits" within the menu on the left-hand side
4. Select which permit you would like to make edits to:
5. Once you are finished - select update for the changes to take effect

• If you want to "turn off" a Permit, click the toggle next to "Active" at the bottom of the page.